RDL D-RT2 Remote Control Selector, Power On/Off

Radio Design Labs' D-RT2 is a wall panel remote control selector designed for turning an audio or video source on or off.The front panel of the D-RT2 features two pushbuttons with two associated LEDs.

Upon initial power-up, the OFF mode is selected.

Touching the other button de-selects OFF and immediately selects ON.

An LED adjacent to each button shows which mode is selected.In a typical installation, the D-RT2 may be used to turn an audio or video source on or off.

To turn on an audio source, the D-RT2 may be connected to an RDL ST-SSR1 or ST-RX2 Solid-State Audio Switch.

For video switching, an RDL TX-MVX may be used.

In each of the above examples, only one output terminal is needed for triggering, therefore a single shielded pair (3-conductor cable) is required for remote connection.

For more complex switching networks, both outputs (ON and OFF) may be used.

In an audio or video control installation, the D-RT2 may be mounted adjacent to an RDL remote volume control, such as the RLC2, RLC3 or RLC10K.In installations where ULTRASTYLE™ wall controls are preferred, use the RUC-4 Universal Remote.Radio Design Labs D-RT2 Features:Remote Selection of ON or OFFSingle-Button Selection for Each FunctionOpen-collector Switching3-wire or 4-wire Remote WiringProfessional Aesthetic AppearanceCompanion to other RDL® Remote ControlsLED IndicationRadio Design Labs D-RT2 Specifications:Selectors (2): Momentary pushbuttons, (1 for ON, 1for OFF)Indicators (2): Green/Red LEDs, (indicates status ON or OFF respectively)Connections: Detachable terminal block; Power input; Separate open-collector outputs for ON and OFF (25 mA max.)Ambient Operating Environment: 0° C to 55° CAudio Design Labs D-RT2 Dimensions:Mounts in standard US electrical box, RDLWB- or SMB-series boxes; cover plate available separately