RDL D-RC2ST 2-Channel Remote Control for STICK-ONs

The front panel of the Radio Design Labs D-RC2ST features two push buttons with two associated LEDs.

Upon initial power-up, source 1 is selected.

Touching the other button de-selects source 1 and immediately selects source 2.

An LED adjacent to each button shows which source is selected.In a typical installation, the D-RC2ST may be used to select between two audio or video sources, or to route audio to two destinations.

To select between two audio sources, the D-RC2ST is connected to an RDL ST-SSR1 Solid-State Audio Switch.

For video switching, an RDL TX-MVX may be used.

For audio routing, an RDL ST-RX2 is used.

In each of the above examples, only one output terminal is needed for triggering.

Therefore a single shielded pair (or 3-conductor cable) is required for remote connection.

For more complex switching networks, both outputs may be used.In installations where ULTRASTYLE™ wall controls are preferred, use the RUC-4 Universal Remote Control.Radio Design Labs D-RC2ST Features:Remote Selection of 2 Audio Sources, Destinations orFunctionsSingle-Button Selection for Each SourceOpen-collector Switching of 1 of 2 Module Functions3-wire or 4-wire Remote WiringProfessional Aesthetic AppearanceCompanion to other RDL® Remote Controls.