Doug Fleenor Design 2322DMX RS-232 to DMX Interface - TERMINAL BLOCK

The Doug Fleenor Design RS-232 to DMX interface allows advanced A/V control systems and computers to operate standard DMX512 devices such as dimmers and moving lights.

It can also be used to allow an RS-232-based control system to receive DMX512 data.

The RS-232 protocol used for this communication is made up of simple ASCII strings sent or received at 9600 baud.

The interface can set and fade DMX channels to specific levels.

It can also record and play 20 presets, each with individual fade times.

The interface can be used to capture incoming levels produced by an outside DMX source.

The RS-232 port appears on the front panel as a standard DB-9 connector.

Another RS-232 port is available on the rear panel through a 3 pin female XLR connector.

Only one of these connections can be used at a time.