SainSmart PA6 Nylon Filament 1.75mm 3D Printer Filament, 1kg Cardboard Spool(2.2lbs), Dimensional Accuracy +/- 0.04 mm, White

PA6 is a thermoplastic plastic with odorless, non-toxic, good strength, heat resistance, excellent impact resistance and low warping.

Our nylon filament delivers excellent printing quality with no Order or warpage during printing.

As the Nylon material is sensitive to moisture, it should be stored in a filament dryer or vacuum bag.

SPECIFICATION Filaments Diameter: 1.75mmDimensional accuracy: +/- 0.04 mmRecommended Nozzle Temp: 220℃-280℃ (428℉-536�9899)Recommended Bed Temp: 80℃-100℃ (176ℯ212ℯ)Printing Speed: 30-70mm/s NOTICE 1.

Abrasion of the brass nozzle happens quite often when printing nylon filament.

A wear-resistant nozzle, such as hardened steel and ruby nozzle, is highly recommended.

2.

If this nylon material is used as the support material for itself, please remove the support structure before excessive moisture absorption.

Otherwise, the support structure can be permanently bonded to the model.