Oznium Fade-in Fade-Out LED Dimmer, 8 Amp Current Rating

Description Input voltage: 12-24VDC Output voltage: Same as input voltage Stand by current draw when unit is powered up, but connected LEDs are off: 25 mA Maximum current: 8A@12VDC, 4A@24VDC Protection: Reverse polarity protection Dimmer size: 78.7mm x 47.5mm x 14.4mm Weight: 68g Length of the wire on both sides: 170mm Wire gauge: 16AWG and 20AWG PWM frequency: 7.5kHz Trigger mode: Support both positive and negative trigger IP Rating: IP66 Note: The Fade- in Fade-out LED Dimmer is designed to have the 12v+ and 12v- input wires constantly connected to a power source* The 8 Amp dimmer needs about 10 seconds to warm up after connected to a power source.* The speed can only be changed when the dimmer switch is at off state.

It means that the light connected to the dimmer has to be off (i.e.

after faded out) in order to change the speed.