Flagpole-to-Go 14" Aluminum Flagpole Deck/Dock Mount

from Archie P.

We mounted 3 of these in our boat slip at the Marina. No More Jumping off the boat for me! They hold the plastic plumbing tubes & we mounted the curved pieces for the rope. One each on Port & Starboard forward of the bow on the dock & 1 almost Midship on our finger pier. On this one we keep the S...

from Darwin A.

I made a weighted umbrella/barbeque prep table and installed this to a 2x6 board using 3/8” stainless steel bolts and hardware. I then drilled and tapped (2) 8MM Knob bolts and painted the post brown. I also drilled a 1/2” hole through the center of the aluminum base and board for drainage. My um...

from Cheryl B.

This makes the greatest umbrella stand ever! Screw it right to the deck, drill the existing hole in the tube all the way through the umbrella and the other side of the tube, secure with a bolt and wing nut, and that baby won't go anywhere! We've used this design for our umbrella stands for years,...

from Janet V.

I use this umbrella base to hold a 7.5 or 9 foot umbrella out on a dock. Great for adding a shady spot over a bench or dock even on a breezy lake day. The thumb screw holds the umbrellas in nicely and keeps them from flying away. Also the base can be mount to almost any surfave and the vertical p...

from Markus Y.

We opted for this to put an umbrella on our dock instead of a big, bulky stand. It was a little pricey for what it is, but it works great and gives us the room we need. Plus, it can be unscrewed at the base when the umbrella comes down so that no one falls onto the pole.