Shappell SWB2 Sled Wear Bars for Jet Sled XL and Kodiak XL

from Buckshot

The wear bars are thick enough to take a lot of abuse. Also, you may or may not have to cut off some of the wear bars. Lastly, you might consider and extra pair of hands when you try and mount wear bars to the radius portion of your sled.

from Townofhell

Bends easy, I've heard these are hard to install by yourself but these pictures show the tools I used for easy installation. Tape tracks down, pre drill holes (I used 2 different bits smaller to the right size) Spin the washer on each screw then stand sled up, put 2 nuts in the torque driver sock...

from CB54

Being that the sled has 5 runners, the wear bar kit should come with 5 wear bars instead of 3 with the price adjusted accordingly, otherwise the kit is excellent and will probably make the sled last a long time.

from Old Buck

Loaded it up with a shelter, ice auger, 3 chairs, 3 vexilars, 3 five gallon buckets full of poles and tip ups and stuff, a couple heaters and some odds and ends. It held it all easily. Good solid sled that should last a long time. Added the runner protectors. Plan to use it for duck and deer hunt...

from Otis

Works as designed