Kingroon PETG 3D Printer Filament, 10 Rolls, Dimensional Accuracy +/- 0.03 mm, 1kg Spool(2.2lbs), 1.75 mm，10KG Ten Colors Black White Grey Red Blue Green Yellow Orange Transparent Silver

"PLA PLUS Filament Easy to print, good molding The melting point of PLA Plus is 155°C-170°C, and the recommended printing temperature is 180°C-200°C, Bending strength: 68.1 ± 2.2(MPa) Charpy impact strength: 13.4 ± 1.2(kJ/m²) Density: 1.2 (g/cm³ at 21.5° C) Vicat Softening temperature: 63 °C PLA PLUS 3D printer Filament Kingroon PLA Plus filament is No plugs, no air bubbles: 3D Printer PLA+ filaments have precise wire diameters, are neatly arranged, and the wires are evenly arranged without entanglement, ensure efficient printing without clogging.

Young’s modulus (X-Y): 2681 ± 215(MPa) Tensile strength (X-Y): 35.7 ± 0.9(MPa) Elongation at break (X-Y): 2.5 ± 0.6(%) Bending modulus: 2700 ± 154(MPa) Melting temperature: 151 °C PETG Filament Setting Recommendations: Printing temperature 210-230°C, Build plate temperature 65-80°C,Printing speed 40-80mm/s Charpy impact strength 5.1 ± 0.3(kJ/m²) Density 1.24 (g/cm³ at 21.5° C) Vicat Softening temperature 84 °C"