Electrostatic Discharge Anti-Static Table Mat Kit, 24" x 36" (2FT x 3FT), Includes an Anti-Static Wrist Strap and Grounding Cord.

Description ARCTIC EAGLE has always been committed to anti-static products.

We have rich experience and have also been recognized by customers.

This is a very durable anti-static table mat kit, worth recommending! How to install an workstation: 1.

Lay the table mat flat on the workbench.

2.

Connect the common point ground cord to the table mat by snapping it to the left or right snap.

3.

Connect the wrist strap to the common point ground cord by plugging the banana plug into one of the ground cord's banana jacks.

4.

Snap the wrist band to the coil cord.

Tip: Make sure that the operator wears the wrist band on bare skin.

5.

Connect the common point ground cord to ground.

Connection to this ground point most easily accomplished by removing the center AC outlet plate cover screw, placing the screw through the eyelets from both ground cords, and replacing the screw.

The wires can be moved to the left and right sides of the screw so that they do not obstruct the outlet.

The Anti Static bracelet has a built-in 1 MΩ resistor.

The working principle of removing static electricity: Static electricity needs to be removed with a link wire with a resistance value of 1 MΩ to 1000 MΩ.

Therefore, the measured resistance value of the wrist strap should be between in order to effectively eliminate the static electricity of the human body.

Note: A wire that is directly connected cannot remove static electricity.