phrozen Aqua Resin for 3D Printing,405nm LCD UV-Curing Photopolymer Resin for Low Shrinkage, Vivid Color, Low Odor, Non-Brittle (Green, 1KG)

Product description Resin Parameters: Keep resin away from direct sunlight exposure.

DO NOT dump resin.

Cure it completely and then treat it as general plastic waste.

Wear PPE like gloves...etc.

Resin should never have direct contact with your eyes or skin.

Stop using UV resins if it causes allergies.

Phrozen Aqua-Resin: Basic Model Resin Density: 1.12 g/cm3 Viscosity: 125 CPS Tensile Strength (Break): 24 Mpa Elongation: 21% I-Zod Impact Strength: 1.81 KJ/m2 Surface Hardness, Shore D: 86 Shore D Water Contact Angle: 55 degree Non-Brittle and Less Smell Affordable resins are usually brittle and smelly, but that's not the case for Phrozen' s Aqua Resin.

With a refined formula, Phrozen team minimized the odor and at the same time designed the resin to be non-brittle.

High Precision and Low Shrinkage It's not easy to balance precision and shrinkage.

With low volume shrin