Doug Fleenor Design DMX6REL30A 6-Channel DMX Relay Pack, 30A Max Output

Doug Fleenor Design makes a series of relay packs that are controlled by DMX512.

This 6-channel unit, designed to switch line voltage loads up to 15 amps, uses 30 amp relays.

Line voltage input is on two 18" 12/3 SJ pigtails (one for CH 1-3, one for CH 4-6) fitted with a 15 amp parallel blade plug (20 amp connector optional).

Switched line outputs are on chassis mounted 15 amp parallel blade receptacles.

Doug Fleenor Designs DMX6REL30A Relay Pack Specifications:Input signal: 250 Kilobaud, 0.2 volts minimum, 12volts maximum.Input circuit: EIA-485 receiver with two 100 ohm PTC self resetting fuses, four low capacitance transient suppression diodes.Input connector: Gold-plated 5-pin male (Neutrik D-1 series).Input pass through: Gold-plated 5-pin female (NeutrikD-1 series).

All five pins are passed through.Power input: 120 - 240 volts, 50/60 hertz, 2watts (plus load).Power input plug: NEMA type 5-15P dead front plug standard, others optional.Power output: Input power is switched to output.Power output socket: Nylon NEMA type 5-15R receptacleOutput rating: 15 amps per output.

Maximum total loadis limited by input rating.Output device: Aromat JTN.Mechanical life: 10,000,000 operations minimum.Electrical life: 300,000 operations minimum at 5 Amps.125,000 operations minimum at 20 Amps.Color: Top, bottom and sides: Silver hammer tone.Front and back: Black.Dimensions: 6.5" D x 1.7" H x 16" WWeight: 5 lbs (optional 19" rack adapter sold separately)Warranty: Five years on defects in manufacturing.

Output device is not covered.