Doug Fleenor Design E1REL20A 1-Channel Ethernet Relay Pack, 20A Max Output

The Doug Fleenor Design E1REL20A controls a relay via ArtNet and sACN (E1.31) Ethernet protocols.

The relay can switch up to a 20 amp line voltage load and is built with a 30 amp relay for robust performance.

The relay pack includes two 18" 12/3 SJ pigtails for line in and switched line out.

Supplied with 15 amp parallel blade connectors as standard, the E1REL20A can be wired with higher rating connectors by special order or may be rewired by the customer.This relay pack uses dry contact air-gap relays and should be used in applications where a true off condition is required (no voltage, no current).

It it not suitable for any use that requires the relay pack to be turned on and off rapidly.

Doug Fleenor Design E1REL20A Applications:Fog machinesPower to moving light fixturesMotorized disco effectsStrobe lightsFansRemoving power from fixtures that are not able to dim to zeroDoug Fleenor Design E1REL20A Specifications:Input signal: E1.31 sACN and ArtNetInput circuit: 100BASE-TX Fast Ethernet, Crossover DetectionInput connector: Neutrik EtherconPower input: 100 to 132V, 50/60 Hz, 4W (plus load)Power input plug: NEMA type 5-15P dead front plug standard, others optionalPower output: Input power is switched to output.

(Hot leg only)Power output socket: NEMA type 5-15R dead front receptacle standard, others optionalOutput rating: 15 amps with standard connectors, 20 amps with optional connectorsOutput device: Omron G8P RelayMechanical life: 10,000,000 operations minimumElectrical life:250,000 operations minimum at 5 amps125,000 operations minimum at 20 ampsColor:Top, bottom and sides: Silver hammer toneFront and back: BlackSize and weight:Dimensions (DxHxW): 6.5" x 1.7" x 6.5"Weight: 2.7 lbsWarranty: Five years on defects in manufacturing.

Output device is not covered